Holy Trinity Church (West Elevation), Wingate.
Completed section of the South elevation where new limestone walling had been introduced and dressed detailing at low level has been replaced.
Replacement of the low level plinth course and projecting cornice
Indentations to the capping stone at the head of the buttress and ornate under kneeler supporting the water tabling
Render removed from the East facing wall of the Nave and mortar joints re-pointed with a lime based mortar.
New cross carved and introduced to the apex of the belfry and facing section of ashlar indented to area below.
Internal scaffolding erected to facilitate access to high level areas and extensive sheeting and boarding used to protect the existing fixtures and fittings which remained in situ during the works.
Photograph illustrating the placement and compaction of lime mortar within the joints of the masonry.
The internal walls of the Church were re-pointed with a lime based mortar which helped to create a light and inviting atmosphere.
The internal walls of the Church were re-pointed with a lime based mortar which helped to create a light and inviting atmosphere.
The project involved the conservation and restoration of the Holy Trinity Church in Wingate over a period of approximately 6 months. By careful indentation using sandstone selected to match that of the existing many of the eroded features such as corbels, plinth and kneeler stones were restored. In addition to external re-pointing the mortar joints to the entire internal area of the Church were raked out and re-pointed using a lime based mortar creating an outstanding end result which is noticeably lighter and more welcoming than before.
Associated works included drainage installations externally to assist in the collection and transfer of rainwater away from the building.
This project was added to our site on 22 September 2007 and is currently filed under Built Heritage .